911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Valve Body: Overhaul
Disassembling and assembling electrohydraulic control unit
Preliminary work
1. Remove electrohydraulic control unit.
Disassembling electrohydraulic control unit
Overview
Explosion
1 - Cover
2 - Cover
3 - Screw (6x80)
4 - Screw (6x55)
5 - Leaf springs
6 - Solenoid valve, 2-3 gearshift
7 - Control solenoid valve, converter jumper
8 - Solenoid valve, 1-2 and 4-5 gearshift
9 - Solenoid valve, 3-4 gearshift
10 - Control solenoid valve, shifting pressure
11 - Control solenoid valve, modulating pressure
12 - Electrical control unit
13 - Hydraulic control unit
Disconnecting hydraulic and electrical control unit
1. Remove electrical control unit. To do so, bend back the retaining lug -arrow- at the strengthening rib on the oil temperature sensor and remove
electrical control unit from hydraulic control unit by pulling it upwards.