911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Loosening pins
3. Remove long-neck pipe.
Vent line
3.1.
Disengage the vent line by loosening it at the retaining clips -arrows- and removing it.
Screws
3.2.
Remove screws -arrows-.
Detach long-neck pipe from the housing using a rubber hammer if necessary. To detach the long-neck pipe, tilt it downwards and guide it out
towards the rear.
4. Remove electromagnetic clutch.
4.1.
Clamp the long-neck pipe in a vice and unscrew the screws between the clutch and long-neck pipe.