911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Seals and Gaskets: Service and Repair
Removing and installing sealing ring for front halfshaft flange
Preliminary work
Danger
Vehicle raised incorrectly.
^
Danger of fatal injury or material damage should the vehicle fall down.
-
Raise the vehicle at the prescribed jacking points.
1. Jack and raise the vehicle at the prescribed jacking points.
2. Remove front underbody panelling.
3. Remove front drive shaft.
4. Place oil collection pan under the transmission.
Removing sealing ring for front halfshaft flange
1. Lever off halfshaft flange.
Halfshaft flange
Lever out halfshaft flange with mounting lever.
2. Carefully lever out sealing ring -1- with a mounting lever -3-.