911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Drive/Propeller Shaft: Service and Repair
Removing and installing cardan shaft
Preliminary work
1. Raise the vehicle at the specified jacking points.
2. Remove underbody panels.
Removing cardan shaft
Information
^
Observe max. joint angle of 20° during removal and fitting. Furthermore, the cardan joint must not be loaded at max. deflection (stop).
1. Remove transmission support.
Transmission support
2. Remove cardan shaft from transmission. Counter at wheel with gear engaged or put on handbrake to prevent it from turning.