911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Constant Velocity Joint Boot: Service and Repair
Replacing bellows drive shaft
Information
The following repair description applies to friction-welded drive shafts -1- and monobloc drive shafts -2-. The distinguishing feature is the diameter of
the shaft. Friction-welded drive shafts -1- approx. 28 mm in diameter/monobloc drive shafts -2- approx. 34 mm in diameter.
The replacement parts for friction-welded and monobloc drive shafts are different.
Replacing CV joints: only the transmission-side CV joint is supplied. Otherwise the entire drive shaft must be replaced.