911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-441003.png)
Replacing circlip
3.2.
Grease circlip -A- for easier fitting.
3.3.
Tap the halfshaft flange -arrow- into the final drive using a rubber hammer.
Tapping in halfshaft flange
Subsequent work
1. Install front drive shaft.
2. Check oil for front final drive and top up if necessary.
3. Install front underbody panelling.
4. Lower the vehicle.
