911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
6.2.
Use new circlip.
Circlip pliers
Install circlip for CV joint with suitable circlip pliers, e.g. circlip pliers vw 161 a.
7. Install lid.
7.1.
Coat sealing surface of lid -arrow- and bellows holder with special sealant.
Greasing lid
7.2.
Push on lid and bellows holder evenly from inner CV joint at congruent holes (holes for the fastening screws) with a plastic hammer (do not
use force).
Marking drive shaft
8. Position and secure bellows.
8.1.
In monobloc drive shafts in accordance with the marking that was made previously -arrows-. In friction-welded drive shafts, between the
relevant depressions.