911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Upper control arms
4. Unscrew fastening screw for halfshaft flange. To do this, screw two drive shaft screws into the halfshaft flange for countering purposes and loosen
the fastening screw.
Fastening screw for halfshaft flange
5. Press wheel carrier downwards and pull out halfshaft flange.
Installing short halfshaft flange
1. Slide halfshaft flange into the transmission.
2. Screw in fastening screw for halfshaft flange. To do this, screw two drive shaft screws into the halfshaft flange for countering purposes and tighten
the fastening screw.
Fastening screw for halfshaft flange
3. Insert and tighten fastening screws for upper control arms.