911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Removing sealing ring on drive shaft
2.1.
Puller 9629 must be screwed securely into the sealing ring.
Pulling out sealing ring on drive shaft
2.2.
Pull sealing ring out by screwing in the hexagon-head bolt.
Installing sealing ring for drive shaft
1. Install sealing ring for drive shaft.
Assembly sleeve on drive shaft
1.1.
Assembly sleeve 9255 must be pushed onto the splines of the drive shaft.
1.2.
Fill the space between the dust and sealing lips on the sealing ring with grease (e.g. Liqui-Moly).