911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
2. Clip in supports on the gearshift bracket. The support with the blue hinged tube must be fitted on the left and the support with the black hinged
tube must be fitted on the right.
Clipping in supports
Information
During installation of the shift and selector cables, the transmission must be engaged in neutral.
3. Engage adjustment pin on pre-selector and shift connections.
Engaging shift cables
4. Close bayonet locks at preselector and shift connections.
Closing bayonet locks
5. Locking bridge P 9619/1 must be removed.