911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
6. Place hardtop on the assembly fixture and lock with the latching levers and the locking lever at front.
INFORMATION: If the cover section is removed undamaged, it can be re-used.
7. Loosen and pull off the cover section -9-.
Removing rear window
INFORMATION:
-
When cutting out the rear window, take care not to damage the rivet connections that are connecting the hardtop body parts.
-
When cutting out the rear window, make sure to cut close to the rear window.
1. Fit a cutter -C- with a u-type cutter -E-. Set the vibration frequency controller to 5. Cut through the bond between the body and the rear window at
the top, bottom and sides. Refer to General information on installing and removing car windows