911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
2. Taking off rear window
Preparing window aperture for installation
Removing adhesive on the hardtop body
INFORMATION: The surface coating of adhesive residue helps new adhesive to stick. Keep cut surfaces clean and free of grease and do not clean
with cleaning solution.
1. When removing remaining adhesive -10- with the cutting tool -C- and the flashing knife -D- on the hardtop body, ensure that a surface coating of
adhesive remains -2-.
Cleaning and priming paint damage or newly built-up paint areas in the window aperture of the hardtop body
INFORMATION: A ventilation period of at least 10 minutes must be observed between the cleaning of the glass section and the application of the
primer. No cleaning solution residues may remain on the body.
1. Clean new paint areas or damage to the top coat paint in the non-visible area of the glass section in the hardtop body with cleaning solution -H1-
and patch with primer -H2-.
Preparing rear window for installation
Removing adhesive from the rear window