911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
9. Release latch -2- on electric plug connection -3- ( -arrow B- ) and pull plug connection off window regulator motor -4- ( -arrow C- ).
Installing rear window lifter
1. Connect electric plug connection -1- to window regulator motor -2- ( -arrow A- ) and lock the latch -3- ( -arrow B- ).
2. Guide window lifter -4- into the window shaft from above -arrow C- and position in the mounts in the inner side section.
3. Remove spacing block -1- between B-pillar and convertible top support -2- ( -arrow A- ). Position convertible top support -2- ( -arrow B- ).
Position and tighten fastening screws -3- and fastening nuts -4- in convertible-top support -2-. Tightening torque: 23 Nm (17 ftlb.)