911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Activating the bonding section of the windscreen
INFORMATION: Only if the windscreen is re-installed
1. During long idle periods (> 24 hours) apply activator -H3- to the remaining adhesive.
Priming the windscreen
INFORMATION:
-
Only with new windscreens
-
A ventilation period of at least 2 minutes must be observed between the cleaning of the glass and the application of the primer. No cleaning
solution residues may remain on the body.
1. Clean the windscreen with cleaning solution -H1-.
2. Apply primer -H2- to the glass flange in the area of the marking.
Installing windscreen
Preliminary work before windscreen installation
INFORMATION: The removed windscreen can be reinstalled if there was no prior damage to the windscreen and the windscreen was removed without
damage.
1. Clip in spacer blocks and press in body-bound rivets.
2. Installing cover for instrument panel (defroster cover).