944 S L4-2479cc 2.5L DOHC (1987)
-
Check rivets and rubber torsion damper for cracks or damage. Replace drive plate when in doubt.
-
Inspect clutch liners. If clutch liners are covered with oil, burnt, damaged or worn at spots, install a new drive plate.
-
Check liner thickness of drive plates.
^
Drive plate with riveted liner:
Relaxed thickness: 8.1 ± 0.3 mm.
Relaxed wear limit: 6.3 mm for symmetrical wear.
NOTE: Clutch liners cannot be replaced.
-
Check drive plate with liner for lateral runout. Max. permissible lateral runout 0.6 mm measured approx. 2 to 3 mm from outside diameter.