Boxster (986) F6-2.5L (1998)
2.1 Fit cylinder head gasket. The gasket is identified by Cyl. 4 - 6 with OPEN/TOP, plus the corresponding part number. Ensure correct seating
of dowel sleeves in crankcase. Fit gasket.
3. Fit guide housing for valve tappets.
4. Lay the completely preassembled unit, camshafts with chain and tensioning element into the Cylinder head. The groove on the inlet camshaft or
lug of the camshaft position sensor cover must face downward.
5. Align camshafts accordingly and fasten with holding-down device, special tool 9611, and holding-down device, special tool 9624.
5.1 Fasten holding-down device 9611 with auxiliary screws M6 x 45.