Boxster S (987) F6-3.2L (2005)
/f6-3.2l/Page-44002.png)
^
Destruction of the control module.
--> During programming, it is essential to guarantee the power supply for the Porsche System tester. It is essential to connect a battery charger with a
current rating of at least 40 A to the vehicle battery.
--> Prior to disconnecting the control module, switch off the ignition and remove the ignition key.
Tools and materials
Tools
Removal tool, universal NR.21
Removing Tiptronic control unit
Removing Tiptronic control module (also referred to generally as control unit below)
Warning: Sudden voltage interruption of the power supply to the control module.
^
Destruction of the control module.
--> During programming, it is essential to guarantee the power supply for the Porsche System tester. It is essential to connect a battery charger with a
current rating of at least 40 A to the vehicle battery.
--> Prior to disconnecting the control module, switch off the ignition and remove the ignition key.
Installation location
1. Fold over the carpet lining and unscrew the three fastening nuts for the Tiptronic control module.
Unscrew fastening nuts
2. Remove control unit then release and pull off the electric connector -Arrow-.
