Boxster S (987) F6-3.4L (2008)
1. Push the removal tool 9570/1 -1- into the navigation unit and pull the navigation unit forward.
2. Unlock the electrical plug -1, 2, 3- on the navigation unit and pull out the navigation unit.
Removing the navigation unit with retaining bracket
INFORMATION:
-
If the navigation unit has to be replaced, the coding must be read out prior to removal using the PIWIS tester P 9718.
-
If the navigation unit is removed with the retaining bracket, then new clips must be used before reinstallation.
1. Give the navigation unit with the retaining bracket a pull forward, and lever out the clips with a screwdriver if necessary.
2. Unlock the electrical plug -1, 2, 3- on the navigation unit and remove the navigation unit with holder.
Installing navigation unit