Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-891001.png)
Underbody Cover: Service and Repair
Removing and Installing Cover For Centre Underbody
Removing And Installing Cover For Centre Underbody
Technical values
Preliminary work
Lift the vehicle. Refer to Lifting the vehicle.
Removing cover for centre underbody
Removing cover for side underbody
INFORMATION:
-
Fastening nuts cannot be used again following removal.
-
Fastening nuts cannot be used again following removal.
1. Unscrew fastening screws -2- and fastening nuts -3-.
2. Pull cover for side underbody -1- out of the overlaps.
Removing cover for centre underbody
