Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-891002.png)
INFORMATION:
-
Fastening nuts cannot be used again following removal.
-
Fastening nuts cannot be used again following removal.
1. Unscrew fastening nuts -3-.
2. Press covers for side underbody down slightly and remove cover for centre underbody -4- from overlaps.
Installing cover for centre underbody
INFORMATION: When sliding in the underbody cover, make sure the overlap is correct.
1. Insert cover for centre underbody -4- while pressing covers for side underbody slightly down.
