Boxster S (987) F6-3.4L (2008)
2. Tighten fastening nuts -3-. Tightening torque, Final tightening: 1.5 ftlb.
Installing cover for side underbody
INFORMATION: When sliding in the underbody cover, make sure the overlap is correct.
1. Insert cover for side underbody -1-.
2. Tighten fastening screw -2-. Tightening torque, Final tightening: 1.5 ftlb.
3. Tighten fastening nuts -3-. Tightening torque, Final tightening: 1.5 ftlb.
Subsequent work
Lower the vehicle. Refer to Lifting the vehicle.