Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-892002.png)
INFORMATION: When sliding in the underbody cover, make sure the overlap is correct.
1. Insert cover for front underbody -1-.
2. Tighten fastening screws -2-. Tightening torque, Final tightening: 1.5 ftlb.
3. Tighten fastening nuts -3-. Tightening torque, Final tightening: 0.5 ftlb.
Subsequent work
Lower the vehicle. Refer to Lifting the vehicle.
