Boxster S (987) F6-3.4L (2008)
Assembling convertible top compartment lid
1. Position outer protective edging 5 on convertible top compartment lid and push into place.
2. Position and push inner protective edging 4onto convertible top compartment lid, and tighten with the fastening screws 3. Tightening torque: 2.8
Nm (2.0 ftlb.)
3. Screw locating peg 2into the convertible top compartment lid. Tightening torque: 9.7 Nm (7.0 ftlb.)
4. Remove protective paper from foam pad 1 and stick pad onto the convertible top compartment lid at the places specified.
Subsequent work
End service position. Refer to Convertible top service position.