Boxster S (987) F6-3.4L (2008)
1. Fit roll-over bar on assembly fixture. Refer to Mounting roll-over bar on assembly fixture.
Installing water drip pan
INFORMATION: The double-sided adhesive tape is used to make the water drip pan more secure.
1. On the roll-over bar -1-, affix two strips of double-sided adhesive tape -2- close to the hood support fastening point.
2. Fit water drip pan -1- on the roll-over bar -2- (-arrows-) and position it at the hole pattern on the hood support fastening point.
3. Press water drip pan onto the two strips of double-sided adhesive tape close to the hood support fastening point -arrows-.