Boxster S (987) F6-3.4L (2008)
INFORMATION: Only use aluminium rivets from the parts package.
1. Fit the short tension strap -1- on the main folding top bow -2- from the inside, position it correctly and secure with a blind rivet -3-.
INFORMATION: Only use aluminium rivets from the parts package.
2. Fit the long tension strap -4- on the tension bow -5- from the outside, position it correctly and secure with a blind rivet -6-.
INFORMATION: Only use aluminium rivets from the parts package.
3. Adjust the corner bow -7- vertically and raise the tension bow -5- according to the length of the strap -arrow-. Fit the short and long tension strap
-1, 4- together on the corner bow from the inside, position them correctly and secure with a blind rivet -8-.
Installing cover for roll-over bar
1. Clip in cover -1- at the side of the roll-over bar -2- (-arrow-).
Subsequent work
1. Install convertible top lock. Refer to Removing and installing convertible top lock.
2. Install front convertible-top mount. Refer to Removing and installing front convertible-top mount.