Boxster S (987) F6-3.4L (2008)
Removing coolant tank
Removing coolant tank
1. Work on bottom of coolant tank -1-:
1.1.
Pull off cable plug -2- on engine coolant level sensor.
1.2.
Remove M8 x 16 screw -3-.
1.3.
Loosen spring band clamp -4- using spring band clamp pliers and slide it back on the coolant hose.
1.4.
Pull off coolant hose -5-.
View of coolant tank from below
2. Work on top of coolant tank -1-:
2.1.
Loosen spring band clamp -2- using spring band clamp pliers and slide it back on the breather hose -3-.
2.2.
Pull off breather hose -3-.
2.3.
Loosen spring band clamp -4- using spring band clamp pliers and slide it back on the breather hose -5-.
2.4.
Pull off breather hose -5-.
2.5.
Loosen spring band clamp -6- using spring band clamp pliers and slide it back on the coolant hose -7-.
2.6.
Pull off coolant hose -7-.
2.7.
Loosen quick-lock coupling -8- and slide vent line back.
View of coolant tank from above
3. Tilt coolant tank -1- a total of 180° in direction of travel and remove it from the engine compartment.