Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-290006.png)
Bracket for side radiator
3. Move side radiator with bracket into installation position. Make sure that the hose holder for the coolant hoses is inserted correctly into the side
bracket. Push side radiator with bracket on to the studs on the side member and insert fastening screw M6 x 16 (outer torx) for the hose holder
-arrow-.
Securing hose holder
4. Position the M8 fastening nuts on the body studs -arrows-.
Fastening nuts
5. Fit fastening screws to the body from below --> Tightening torque: 23 Nm (ftlb.) (17) -arrow-.
