Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-252004.png)
5. Fit throttle body by screwing in and tightening the four Torx screws (M6 x 50) -arrows- . Tightening torque: 7.5 ftlb.
6. Lightly grease and fit new moulded seats - Intake distributor gasket for intake-air distributor with Optimol MP3.
7. Clip solenoid valves into the brackets.
8. Clip ball sockets onto ball heads; if necessary, lightly grease with Optimol MP3 beforehand.
9. Screw in fastening screws -arrows-.
10. Fasten cycle valve with tapping screw -arrow-.
11. Push on hose -2- and position clamp -1-.
12. Replace O-rings on fuel injectors and apply a light coat of silicone spray to ease fitting.
13. Fit fuel ring pipe by pressing the fuel injectors into the seats in the intake-air distributor and tightening the four Torx screws (M6 x 12) -arrow-.
Tightening torque: 7.5 ftlb.
