porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Tail Lamp > < Removing and Installing Front Angle Sensor For Headlight Levelling System|Page 5409
Page 1
background image

Headlamp Switch: Service and Repair

Removing And Installing Main Light Switch

Removing main light switch

Switch off ignition and remove ignition key.

1. Press in rotary knob on the light switch (but not to the limit) and turn the switch to the right.
2. Pull the light switch out.

3. Release -A- and remove -B- electrical connector.

Installing main light switch

1. -A- Insert the light switch connector until it is felt to engage.
2. -B- Push in the light switch to its limit and turn the rotary knob anti-clockwise.

Tail Lamp > < Removing and Installing Front Angle Sensor For Headlight Levelling System|Page 5409