Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-1067002.png)
Subsequent work
Subsequent work - rear angle sensor for headlight levelling system
INFORMATION: If the angle sensor has been replaced, the front end control unit must be calibrated; afterwards the headlight setting must be checked
and adjusted if necessary.
1. Connect the Porsche System Tester PIWIS Tester 9718 to the vehicle and start the System Tester. Switch on ignition. >> to continue.
2. Select front end on the control unit, carry out calibration menu.
3. Check headlight setting and adjust if necessary.
