Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-145012.png)
3. Push line into the compressor, secure with the fastening screw -2- and clip line into the support -7-. - Tightening torque: 21 Nm (16 ft. lbs.)
4. Insert line in underbody area into rubber mount -6-, close support and secure with fastening nut -5-.
Subsequent work
Subsequent work for compressor/evaporator line
Install air-conditioning compressor on engine.
Fill in refrigerant.
Removing and Installing Condenser-Fluid Tank Line
Removing And Installing Condenser-fluid Tank Line
Technical values
Preliminary work
Preliminary work for line condenser-fluid tank
Removing left front wheel.
Remove front left wheel housing liner.
Draining refrigerant.
Removing the condenser-fluid tank line
