Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-377003.png)
The LWL is delivered with affixed plastic contacts. These contacts are latched in the connector housing in the case of repairs. Grey and black contacts
with identical mechanical dimensions are used.
Grey contacts are used in the wiring harness >> control unit junction (optical input).
Black contacts are used in the control unit >> wiring harness junction.
Push-on connector - connection points
Optical fiber (LWL) - module
In all MOST control units, at least one sending diode and one receiver diode are installed. The sending diode of a MOST device is connected to a
receiver diode of a 2nd MOST device. This results in a ring where the light signal is reinforced in each control unit (in each control unit, the light signal
is transformed into an electrical signal).
The graphic clarifies the cabling of the individual MOST control units which vary according to their equipment.
Optical waveguide variants
INFORMATION: Depending on the equipment I No., the installation positions of the audio components in the front luggage compartment differ.
MOST control units, variant A - B - C
MOST control units, variant A - B - D
