Boxster S (987) F6-3.4L (2008)
Air Injection Pump: Service and Repair
Removing And Installing Secondary Air Pump
Technical values
Preliminary work for removing secondary air pump
1. Place protective covers on the vehicle to avoid damaging the body.
2. Remove intake-air distributor 4-6.
Removing secondary air pump
1. Loosen cable duct by unscrewing the Torx screw (M6 x 16) -arrow-.
2. Carefully press cable duct down by hand and unscrew the three Torx screws (M6 x 50) -arrows-.
3. Unclip cable plug -1- with retaining clip and disconnect plug connection.
4. Carefully lever off air hose -1- using a wooden or plastic spatula.
5. Lift secondary air pump from the bracket.
Installing secondary air pump
1. Position secondary air pump in installation position.