Boxster S (987) F6-3.4L (2008)
2. Push on coolant hose -1-.
3. Connect cable plug and clip it in -1-.
4. Carefully press cable duct down by hand and screw in and tighten the three Torx screws (M6 x 50) -arrows- . Tightening torque: 7.5 ftlb.
5. Fasten cable duct by screwing in and tightening the Torx screw (M6 x 16) -arrow- . Tightening torque: 7.5 ftlb.
Subsequent work for installing secondary air pump
1. Install intake-air distributor4-6.