Boxster S (987) F6-3.4L (2008)
Leak Detection Pump: Service and Repair
Removing And Installing Leakage Diagnosis Pump
Removal
Removing leakage diagnosis pump
1. Unclip sheetmetal clips on carbon canister -1- with a screwdriver.
2. Carefully open the carbon canister using a rigid spatula or a wide screwdriver. -arrows-
3. Remove active carbon unit and lid.
4. Unscrew Torx screw -1- and pull off air filter.
5. Unscrew three Torx screws -1- used to secure the leakage diagnosis pump -3-.
Open the clamp -2- and pull off the hose.
6. Pull off cable plug for leakage diagnosis pump and remove carbon canister lid.
7. Remove leakage diagnosis pump.
Installation
Installing leakage diagnosis pump
1. Position leakage diagnosis pump.
2. Screw in three Torx screws -1- used to secure the leakage diagnosis pump -3-.