Boxster S (987) F6-3.4L (2008)
by installing new wires. Lay the new wires along the main wire harness and tie them to it.
INFORMATION: Depending on the equipment I No., the installation positions of the audio components in the front luggage compartment differ.
1
- Plug connection between main wire harness and front-end wire harness right
2
- Fuse box for fan
3
- Connector for front-end control unit
4
- 6 - Connector for navigation unit
7
- 8 - Connector for CD changer
9
- Connector for loudspeaker amplifier
10
- Connector for luggage compartment light
11
- Ground point
12
- Plug connection between main wire harness and front-end wire harness left
13
- Connector for hydraulic unit 14 - Connector for brake fluid sender
15
- Connector for tyre pressure monitoring system control unit
16
- Grommet
17
- 18 - Plug connection for ABS wire harness, front left and right
19
- 20 - Connector for tyre pressure monitoring system antenna, left and right
21
- Connector for filler flap switching element
22
- Connector for tank filler neck
23
- Connector for rod antenna
24
- Connector for GPS antenna
25
- Connector for radio antenna
26
- Connector for vertical sensor
27
- Connector for pressure switch
28
- Connector for alarm siren
29
- B+ line to power distributor
30
- 31 - Plug connection for PASM, front left and right
32
- 33 - Connector for windscreen washer system spray nozzle, left and right
34
- Connector for headlight beam adjustment angle sensor
35
- Connector for fluid level indicator sender
36
- Connector for windscreen washer system pump
37
- Connector for headlight washer pump
38
- Connector for wiper motor
39
- Connector for alarm horn
40
- Connector for fuel level sensor
41
- Grommet