Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-629012.png)
18. Loosen cable duct to the left side wall.
18.1. Unclip main wire harness to the bottom of the B-pillar -arrow A-.
18.2. Take out cable duct upwards out of the rear wall plate -arrow B-.
19. Release and pull off connector for airbag sensor, centre left and right -58 and 59-.
20. Release and pull off connector for ParkAssist control unit -60 and 61-.
21. Release and pull off connector for control unit for rear convenience systems -62 to 64-.
22. Loosen ground point under the driver's seat -65-.
22.1. Screw off fastening nut and remove ground straps.
23. Unclip ground point under driver's seat.
24. Release and remove connectors for telephone control unit -66 to 69-.
24.1. Unclip wire harness for telephone control unit.
