Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-629020.png)
7. Fasten ground points on dashboard bracket.
7.1. Fit ground straps and tighten with fastening nuts. - Tightening torque: 9 Nm (6.5 ft. lbs.)
8. Push on connector for antenna amplifier, left and right -103 to 107-.
9. Remove protective film of adhesive strip on main wire harness -area A- and affix main wire harness to A-pillar.
10. Clip in main wire harness at front of roof frame.
11. Clip in cable duct at front of roof frame.
12. Connect plug connection of make-up mirror, left and right -101 and 102-.
