Boxster S (987) F6-3.4L (2008)
4. Cut and remove tie-wrap for fixing the wire harness to the connector housing.
5. Release connector housing with a small screwdriver, lift upwards and remove from connector.
6. Lift connector guide and remove from connector.
INFORMATION: Allocation of lines - see wiring diagram.
7. Release contact of the damaged line using the press-out tool 1575 1P of the press-out and unlocking tools for flat and round plug connections of all
sizes NR.155 ( -arrow a- ) and pull out of the contact strip.
8. Connect connector for the new wire harness on the relevant component until it engages securely.
8.1. Connectors for stage 1 and stage 2 of passenger's airbag unit -1 and 2- Push on connectors for stage 1 and stage 2 of passenger's airbag unit
until they engage securely.
8.2. Connector for seat-belt pretensioner, left -7- and right -8-
Push on connector for the seat-belt pretensioner until it engages securely.
Fit rubber sleeve -9-.