Boxster S (987) F6-3.4L (2008)
2. Remove rear wheel housing liner.
3. Remove convertible top and water drip pan.
Removing wire harness for anti-lock brake system (ABS)
Removing front ABS wire harness
1. Release the cable retainer -arrow A- and pull off the two connectors -arrow B-.
2. Unscrew the fastening screw and remove the connector socket -arrow C-.
3. Remove the ABS wire harness from the brackets -arrows A-.
4. Open the clips -arrows B- and remove the ABS wire harness -arrow C-.
5. Remove the fabric tape -D-.
INFORMATION: When cutting the ABS wire harness, make sure that there is enough line length left to join to the new lines.
6. Cut off the ABS wire harness around -E- and remove it.