Boxster S (987) F6-3.4L (2008)
1. Remove clamping strip -1- of cloth -2- over the entire length of the convertible top frame -3-.
Disconnecting electric plug connection of wiring harness for convertible top
1. Fully open the convertible top
2. Switch off ignition and remove ignition key.
3. Pull off connector -1- -Arrow A-, unclip retaining clip -2- -Arrow B- and pull out wiring harness from the body -Arrow C-.
Removing wiring harness for convertible top
INFORMATION: The wiring harness for the convertible top is sewn into the cloth and can only be replaced together with this.
1. Switch on ignition.
INFORMATION: Move convertible top to service position, but do not engage retaining strap on centring pin.
2. Move convertible top to service position.
3. Switch off the ignition.
INFORMATION: The hook 3 must not be removed from the pin as this is tensioned by the rubber strap.