Boxster S (987) F6-3.4L (2008)
Preliminary work
Preliminary work for wire harness for door
1. Disconnect battery.
2. Remove door trim panel.
3. Remove power window motor.
4. Remove head airbag.
Preliminary work for wire harness for door trim panel
1. Disconnect battery.
2. Remove door trim panel.
Removing wire harness for door
Removing side footwell trim on driver's side
INFORMATION: Work is only necessary for removing or installing the wire harness for the driver's door.
1. Remove fuse carrier cover -1- (-arrow A-).
2. Unscrew the three fastening screws -2- and take off the footwell trim panel -3- (-arrow B-).
Removing side footwell trim on passenger's side