Boxster S (987) F6-3.4L (2008)
-
When doing this, ensure the lines are routed correctly so that no line becomes trapped or damaged.
1. Route wire harness for door. Fit both rubber sleeves -arrows A- and clip in the wire harness for door using the five retaining clips -arrows B-.
2. Connect connector on bass loudspeaker until the connector engages securely.
3. Install door sub-frame.
Locking wire harness for door (driver's side) at the A-pillar
1. Push wire harness for door -8- through the A-pillar and fit rubber sleeve -8-.