Boxster S (987) F6-3.4L (2008)
18. Push connector onto headlight -5- at the left and right.
18.1. Push connector onto headlight at left and right -arrow A-.
18.2. Push on securing clip from below until it engages securely -arrow B-.
19. Fasten ground point -4- at the left and right.
19.1. Connect ground straps and screw down fastening nut. - Tightening torque:9 Nm (6.5 ft. lbs.)
20. Push connector onto fuse box for fan -2-.
20.1. Push connector onto fuse box for fan -arrow A-.
20.2. Close lid -arrow B- until it engages securely.
20.3. Position fuse box below on the clip -arrow C- and clip it in -arrow D-.
INFORMATION:
-
If a spare part is requested, a standard wire harness with a connection point (plug connection) is supplied for all models. This wire
harness is installed as of model year 2006.
-
For model year 2005 vehicles, the old plug connection must be removed from the old wire harness and fitted on the new wire harness.
- Pin assignment according to wiring diagram.
21. Push together plug connection between front end wire harness and main wire harness at the right -1-.
21.1. Push together plug connection between front end wire harness and main wire harness at the right -arrow A- and lock it -arrow B- until it
engages securely.
Subsequent work
1. Install front apron.