Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-686003.png)
1. Remove the diagonal braces.
Unscrew nuts -2a- and bolts -2b- and remove diagonal braces at the left and right.
2. Remove support plate.
Unscrew nuts -3a- and bolts -3b- and take off support plate.
3. Remove transmission bracket with hydraulic mount.
Support transmission before removing the transmission bracket! When supporting the transmission, ensure that there is no tension on the screws on
the transmission bracket -A-.
Unscrew nuts -Arrows- on hydraulic mount -B-.
A - Transmission bracket
B - Hydraulic mount
C - Fastening nut (never loosen)
Hydraulic mount
Unscrew screws -Arrows- on transmission bracket -A- and remove transmission bracket -A- together with hydraulic mount.
Mount for transmission bracket
4. Remove cross member -4- together with sensor -5-.
Sensor:
Unscrew M6 nut securing sensor to control arm and disengage linkage.
Pull off electric connection.
Cross member:
Pull electric plug connections and lines out of the holders.
