Boxster S (987) F6-3.4L (2008)
Differential Output Shaft: Service and Repair
Removing and Installing Short Halfshaft Flange
WM 392519 Removing and installing short halfshaft flange
Preliminary work
Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Remove support plate.
3. Place oil collection pan under the transmission.
Removing halfshaft flange
Removing halfshaft flange
Information: Protect drive shafts against mechanical damage (e.g. with a rubber hose which has been cut open).
1. Remove right drive shaft on transmission side. To do this, unscrew the six Allen screws joining each drive shaft and transmission flange. Counter
at the wheel or activate the parking brake to avoid simultaneous turning.
Drive shaft
2. Unscrew fastening screw for halfshaft flange. To do this, screw two drive shaft screws into the halfshaft flange for countering purposes and loosen
fastening screw.
Loosening screw for halfshaft flange