Boxster S (987) F6-3.4L (2008)
3. Remove the halfshaft flange.
Installing halfshaft flange
Installing halfshaft flange
1. Insert halfshaft flange.
2. Screw in fastening screw for halfshaft flange. For this purpose, screw in two drive shaft screws to counter and tighten fastening screw.
Tighten screw for halfshaft flange
3. Fit right drive shaft on transmission side. To do this, screw in the six Allen screws joining each drive shaft and transmission flange and tighten
screws. Counter at the wheel or activate the parking brake to avoid simultaneous turning.
Drive shaft
Subsequent work
Subsequent work
1. Check and, if necessary, top up oil for final drive.
2. Fit support plate.
3. Lower the vehicle.