Boxster S (987) F6-3.4L (2008)
Differential Output Shaft: Service and Repair
Removing and Installing Long Halfshaft Flange
WM 392519 Removing and installing long halfshaft flange
Preliminary work
Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Remove support plate.
3. Drain oil for final drive.
Removing halfshaft flange
Removing halfshaft flange
Information: Protect drive shafts against mechanical damage (e.g. with a rubber hose that has been cut open).
1. Remove left drive shaft on transmission side. To do this, unscrew the six Allen screws joining each drive shaft and transmission flange. Counter at
the wheel or activate the parking brake to avoid simultaneous turning.
Drive shaft
2. Unscrew fastening screws for mounting saddle.
Mounting saddle screws