Boxster S (987) F6-3.4L (2008)
1. Take off brake cover plate on the wheel bearing housing.
2. Press out wheel hub.
Press the wheel hub out using a press-out mandrel P 297a. A separating device ([diameter] = 12 - 115 mm) NR.111 and a suitable support must
be used for countering.
Wheel bearing housing
3. Remove bearing cover.
Unscrew screws -1- and remove bearing cover.
Removing bearing cover
4. Heat wheel bearing housing to approx. 100°C (max. 120°C).
5. Press out wheel bearing using a tubular piece VW 415 A.