Boxster S (987) F6-3.4L (2008)
4. Push end of shift and selector cable - at transmission side - into the opening in the engine compartment lid.
Pushing in shift and selector cables
5. Clip in shift cable at the distributor pipe.
Clipping in shift cable
Securing shift and selector cables inside vehicle
1. Locking bridge P 9619/1 must be fitted on the gearshift bracket.
Fitting locking bridge
2. Clip in supports on the gearshift bracket. The support with the blue hinged tube must be fitted on the left and the support with the black hinged
tube must be fitted on the right.